|
Polar's Solar Electric Hybrid Systems:
-
Provide up to 5 kW of 120/240 AC power 24 hours a day, seven days a week
-
Larger systems are available
-
Requires the least amount of maintenance over other systems and technologies
-
Can function as a UPS system and reduce your electrical bills at the same time
-
Net metering capability
-
Systems can be transported from site to site
-
24 or 48 Vdc outputs are available
-
The DC generator provides reliable backup to the batteries
-
The DC generator supplements the power from the PV Array
Can
be shipped and installed anywhere in the world.
System
can be shipped dissembled for simple assembly on site.
Special frames can be provided for Helicopter
transportation to the site.
A Simple Operation
The system derives most of its energy through the solar
Photovoltaic (PV) array. The
PV array supplies DC power to the inverter during the day and at
the same time charges a bank of batteries.
The inverter converts the DC power into AC at 120/240 Volts
as required to operate your appliances.
At night time the batteries supply power to the inverter
thereby providing reliable power 24 hours a day.
There is a DC generator in the system to charge the
batteries during heavy energy usage or periods of poor sunshine.
The DC generator is more efficient and reliable than an AC
generator. AC
generators, however, are available
Completely
engineered as a system.
In a solar electric system there are many engineering factors
that should be incorporated into the system design to maximize
reliability and efficiency along with lowering maintenance.
System
incorporates Thermoregulation for longer component life.
A
combination of passive and forced ventilation keeps the inverter,
batteries, and generator running cool.
For each 10 degrees over room temperature the life of the
batteries is decrease by one half. In addition hot enclosures decrease inverter capacity and
reliability along with increasing the generator’s
oil maintenance
requirement. Even
in cool weather with conventional shelters, the heat build up from
the inverter and batteries under charge and or the generator
operation can raise the shelter temperatures to destructive
temperatures.
Rugged
construction and corrosion resistant.
The base frame is constructed of welded 4" and 3" C channel for unitized
strength. The entire base is then hot dipped galvanized to protect
the welds and metal from corrosion.
The PV array
supports are constructed galvanized Unistrut.
Simple
and concise wiring meeting National Electric Codes.
Wiring
on a production bases (as opposed to custom installations wired in
the field) provides better documentation, cleaner wire runs, and
greater immunity to lightning surges.
Polar provides wires that are numbered on each end for
easier trouble shooting, optimum wire gages are used with the
correct circuit breaker capacities. Polar uses the very best 105 C and higher rated wire with
very long life insulation materials.
Humidity, temperature, battery acid, engine oils and fuels
can break down many of the lower cost wire insulation materials,
Polar uses the best insulation materials for safety and
long life. Detailed
wiring schematics are provided.
Adjustable
tilt on the PV array structure.
Simple
to adjust array tilt maximizes solar energy output season to
season.
Can be
shipped and installed any where in the world.
|
Applications:
-
Factories and
commercial buildings
-
Homes and farms
-
Telecommunications
sites
-
Hotels,
cottages, and remote resorts
-
Oil
Field
-
Remote
research stations
-
Temporary
power for fairs and special promotional events
-
UPS,
Uninterruptible Power System
|

Model 1200
|
|